We offer lowest price on Rust Inhibitor Spray Paint. With Life and Home you always get the best deals
DETAILS
DESCRIPTION
Rust-Oleum Stops Rust Gloss Protective Enamel Spray is the No. 1 rust-preventive paint available. It provides lasting protection and beauty in a wide variety of colors and finishes. Apply to metal, wood, concrete or masonry. It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying. In addition, there is an any-angle spray feature that allows you to spray in any direction, even upside-down.
Highlights:
- Can
- Color: Semi-Gloss Black
- Size: 12 Oz.
- Indoor/Outdoor.
- Durable, corrosion-resistant.
- Gloss, semi-gloss or flat finish.
- Use on metal, wood, concrete.
- Rust inhibitive.
- Indoor/outdoor.
- Moisture & weather resistant.
- Resists fading, cracking, chipping & peeling.
- No priming on new or lightly rusted metal.
- Aerosol can.
Painting Conditions:
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Application:
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can 10-16" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart to avoid runs and sags. Metallic Sprays are not recommended for outdoor use. Do not use near open flame.
Dry And Recoat:
Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries tackfree in 2-4 hours, to handle in 5-9 hours, and is fully dry in 24 hours. Apply a second coat within 1 hour or after 48 hours. A clear coat finish is not recommended.
