Old Masters 80216 Thick 'n Ezy Gel Stain, 1/2 Pt, Golden Oak

buy interior stains & finishes at cheap rate in bulk. wholesale & retail wall painting tools & supplies store. home décor ideas, maintenance, repair replacement parts
Write a review
Thick 'n Ezy Gel Stain - renowned for giving deep, bold beauty to both wood and nonporous surfaces, excels in its adhesion to fiberglass and plastic. Color: Golden Oak
SKU: 42912939
MFG: 80216
Shop more products by Old Masters.

Buy Interior Stains & Finishes on sale from largest wall painting tools & supplies store in USA

$16.99
In Stock
Request a Bulk Quote


Thank you for your quote request. We will be in touch.

DETAILS

DESCRIPTION

Old Masters Gel Stain is a highly pigmented, oil-based stain designed to achieve intense colors on interior and exterior wood, fiberglass, metal and composition surfaces. Its thick formula allows easy application and superior color control, necessary to achieve a rich and uniform color on most surfaces in a single application. Ideal for difficult-to-stain woods such as pine, poplar, maple, plywood and veneers, as well as nonporous surfaces including metal, composition (Masonite), interior and exterior fiberglass doors and plastic moldings.

Highlights:

  • Size: 1/2 Pt
  • Color: Golden Oak
  • Thick 'n Ezy Gel Stain - renowned for giving deep, bold beauty to both wood and nonporous surfaces, excels in its adhesion to fiberglass and plastic.
  • Offers superior color control for difficult applications.

Max VOC:

550 grams/liter (4.6 lbs/gal)

Coverage:

Approximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.

Drying Time:

Approximately 6 to 8 hours depending upon temperature, humidity, air movement and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.

Recommended Finish Coat:

This stain can be topcoated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Spar-Marine Varnish or Exterior Water-Based Spar-Urethane. When applying water-based finishes, allow a minimum of 24 hours before topcoating.

Application:

Application on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried. (The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.)

Application on Fiberglass & Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.

Application over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters® Woodgraining Tool, as illustrated in the Old Masters® Woodgraining Booklet.

Application over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.

Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

FEATURES

MFR: 80216
SKU: 42912939
UPC: 086348802162
Brand: Old Masters
Attachments: MSDS Sheets,

REVIEWS