"Insl-X" Stix Waterborne Bonding Primer
Stix® Waterborne Bonding Primer is a premium quality, waterborne, acrylic urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, including PVC, Vinyl, Plastic, Glass, Tile, Glazed Block, Glossy Paints, Pre-Coated Siding, Fiberglass, and Galvanized Metals. Stix is also ideal for use on plaster, drywall, wood, and nonferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. It cures in temperatures as low as 35°F and offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer Finishes. Stix® is a low VOC primer, which levels to a smooth surface and cleans up with soap and water.
Not intended for immersion service or continuous water contact. Not for below grade applications. Not recommended for use over polyethylene, polypropylene or Kynar. Stix® must be top coated for exterior use. Use as a spot primer only on exterior wood. On bare cedar or redwood, use a tannin blocking primer.
- Premium quality waterbased acrylic urethane
- Bonds to hard-to-coat glossy surfaces and more
- Excellent adhesion and sealing
- Recoat time 3 hours
- Top coat with latex/oil/urethane/epoxy/lacquer
- Cures in low temperatures
- Low odor
- Dry time: 30-45 minutes
- Coverage: 100 sq. ft.
- 1 Quart
Where To Use:-
Interior & Exterior: Drywall, Plaster, Ceiling, Acoustical Tile, Wood Trim & Doors, Formica, Ceramic Tiles, Glossy Surfaces, PVC Plastic, Masonry Walls, Wood Siding, Cedar & Redwood, Wood Fences, Trim, Shutters, Masonry, Stucco, Concrete, Cement Block, Galvanized Metal, Aluminum, Vinyl Siding, etc.
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.