We offer lowest price on Enamel Spray Paints. With Life and Home you always get the best deals

DESCRIPTION

Rust-Oleum Professional High Performance Enamel Spray provides superior coverage and hiding. Apply to metal, wood, concrete and masonry in heavy-duty and commercial environments. Retains color against the elements.

Professional Enamel Sprays provide a durable protective coating with superior rust prevention, and excellent resistance to abrasion, fading, chipping, and dulling. It applies easily, provides excellent coverage and dries fast to a tough attractive finish. Professional Enamel is ideal for ferrous, non-ferrous metal and wood surfaces. It features a high output tip which can be sprayed at any angle. Not for use on galvanized metal.

Highlights:

• Size: 15 Oz.
• Color: Semi-Gloss Black
• Apply to metal, wood, concrete and masonry in heavy-duty and commercial environments.
• Retains color against the elements and provides superior coverage and hiding.
• Fast drying.
• For indoor and outdoor use.
• Durable and corrosion-resistant.

Application:

Apply only when air and surface temperatures are between 50-90°F (10-32°C) and relative humidity is below 85% to ensure proper drying. Protect surrounding area from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle Do not strike can. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart to avoid drips and runs.

Dry And Recoat:

Dry and recoat times are based on 70°F (21°C) and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 15 minutes, to handle in 1-2 hours and is fully dry in 24 hours. Primers can be topcoated immediately. Apply a second coat within 1 hour or after 48 hours.

Clean Up:

Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.

Clogging:

If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening.

Physical Properties:

• Resin Type: Modified Alkyd
• Fill Weight: 15 oz. (426 g)
• Volatile Organic Compounds: <60% (primers and flats) <65% (non-flats)
• Practical Coverage at Recommended DFT (assumes 15% material loss): Approximately 14 sq. ft./can (1.3 m²/can)
• Dry Times at 70°F (21°C) and 50% Relative Humidity: Touch (15 minutes), Handle (1-2 hours), Recoat (Within 1 hour or after 48 hours (7515, 7569 and 7582, recoat at any time)
• Dry Heat Resistance: 200°F (93°C)
• Shelf Life: 5 years
• Flash Point: -156°F (-104°C)