Rust-Oleum’s Painter’s Touch Ultra Cover 2x delivers twice the coverage as other competitive brands! The advanced Double Cover Technology provides the best formula for ultimate hiding power, which allows projects to be completed faster and easier. Apply to wood, wicker, metal, plaster or unglazed ceramic. Fast-dry formula resists chipping and fading.
Rust-Oleum Painter’s Touch Ultra Cover 2X Enamel Sprays are designed to provide long lasting protection and durability. These sprays apply easily, provide excellent coverage and dry fast to a tough attractive finish. Rust-Oleum Painter’s Touch Ultra Cover 2X Enamel Sprays feature and advanced spray system that allows you to spray at any angle, even upside down for those hard to reach areas. A comfort spray tip with a wider finger pad to reduce fatigue caused by continuous spraying. Not for use on galvanized metal.
- Color: Gloss Purple
- Size: 12 Oz.
- Ultimate Coverage.
- Smooth, durable finish.
- Any-angle spray with comfort spray tip.
- For indoor/outdoor use.
- Use on wood, wicker, metal, plaster or unglazed ceramic.
- Fast-dry formula resists chipping and fading.
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50ºF (10ºC) and 90ºF (32ºC) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200ºF (93ºC). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16” from surface and spray in a steady back-andforth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.
Dry & Recoat:
Dry and recoat times are based on 70ºF and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 20 minutes, to handle in 1 hour, and fully dry in 24 hours. Apply a second coat or Clear coat within 1 hour or after 24 hours. Apply Clear coat in 2-3 light coats a few minutes apart.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov