Rust-Oleum Stops Rust Gloss Protective Enamel Spray is the No. 1 rust-preventive paint available. It provides lasting protection and beauty in a wide variety of colors and finishes. Apply to metal, wood, concrete or masonry. It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying. In addition, there is an any-angle spray feature that allows you to spray in any direction, even upside-down.
- Color: Semi-Gloss White
- Size: 12 Oz.
- Durable, corrosion-resistant.
- Gloss, semi-gloss or flat finish.
- Use on metal, wood, concrete.
- Rust inhibitive.
- Moisture & weather resistant.
- Resists fading, cracking, chipping & peeling.
- No priming on new or lightly rusted metal.
- Aerosol can.
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can 10-16" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart to avoid runs and sags. Metallic Sprays are not recommended for outdoor use. Do not use near open flame.
Dry And Recoat:
Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries tackfree in 2-4 hours, to handle in 5-9 hours, and is fully dry in 24 hours. Apply a second coat within 1 hour or after 48 hours. A clear coat finish is not recommended.