Rust-Oleum Metallic Spray provides a brilliant metal finish with weather-resistant metallic flakes. Provides excellent rust protection for heavily handled objects, such as autos, bikes, fixtures, door hardware and more. It features a comfort tip with a wider finger pad and an any-angle spray feature that allows you to spray in any direction, even upside-down.
Rust-Oleum Stops Rust Outdoor Metallic Sprays are designed to provide a durable protective coating with excellent resistance to rust, and excellent resistance to abrasion, fading, chipping, and dulling which will not rub off. These sprays apply easily, provide excellent coverage and dry fast to a tough attractive finish. Rust-Oleum Stops Rust Outdoor Metallic Sprays are ideal for ferrous, non-ferrous metal and wood surfaces. It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying and an anyangle tip which allow s you to spray at any angle. Not for use on galvanized metal.
- Size: 11 Ounce
- Color: Vintage Copper
- Durable, corrosion-resistant.
- Brilliant metallic finish.
- With weather-resistant metallic flakes.
- Provides rust protection for heavily handled objects.
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-andforth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.
Dry And Recoat:
Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 10 minutes and fully dry in 24 hours. Recoat at any time.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov